All of the SB16- Straight Stick Finish Nails above also fit
these Air Finish Nailers: Craftsman:
18431, DeWalt: D51275K,
DuoFast: LFN748, D51275K, Hitachi: NT65A,
Porter Cable: FN250, FN250A,
Paslode: IM250 II &
IM250F, Trimpulse, 3250-F16
Order Online at DS Manco™ Packaging and Fastening Now
Information Regarding Corrosion -
Steel nails are made from galvanized wire and not treated after nails
are manufactured. As such, the manufacturer does not guarantee or
warranty product against corrosion for any specified time.
Zinc coatings on nails and staples can help with corrosion. However,
high humidity, salt air, acidic wood, industrial gases, installation
impact, preservatives and fire retardants containing salts, can break down
the Zinc coating and cause fasteners to rust. Harsh conditions may
call for special material coating or special fasteners such as aluminum or
stainless steel. Wood manufacturers may call for special or high
grade galvanized fasteners which if not used void their product
warrantees. Always check the wood manufacturers' specifications
beforehand to insure full compliance with their requirements.
Important
- You and others working around you can be seriously injured by
fastener driving tools if you do not follow the instructions
provided on the tool and in the operations manual. Used
properly, these tools provide easy, safe and efficient methods for
driving nails, staples & rings.
Contact Trip -
best
suited for high volume rapid fastening where exact placement of the
fastener is not important. Sequential
Trip - best suited when rapid fastening is not needed or when
exact fastener placement is important. Trigger
Operation -
used when
the work piece contact is not practical because of the specific
operation performed by the fastener driving tool. Evaluate your
application to determine the best trigger trip.
